A landlord inspection form is what you take on the routine visit to a home you rent out: a look at the outside, every room, the kitchen and bathrooms, the smoke and carbon monoxide alarms, and the heating and hot water, with a note of anything the tenant has raised and a list of what needs fixing. It works for a house or a flat, adds as many rooms and bathrooms as the home has, and you can fill it in here and download a finished PDF without creating an account.
What a routine landlord inspection is for
There are three visits people call a landlord inspection. The move-in record documents the home on the day the tenant takes the keys, and the move-out record compares the home against it when they leave. Both are about evidence for the deposit.
This form is the visit in between. Its job is to catch slow problems early — a drip under a sink, a gutter overflowing onto a wall, an alarm with its battery removed — and to see that the home is being looked after. It ends in a repair list, not a deduction.
Give notice, and keep to the home
Most states and countries require written notice before a landlord enters an occupied rental for an inspection, and some limit how often routine visits can happen. Twenty-four to forty-eight hours is common in the US, but check your own rules and the lease, and record the date notice went out at the top of the form.
You are inspecting the property, not the household. Open the cupboards that hold fixtures — under the sinks, the water heater closet, the electrical panel — but do not go through belongings, and photograph the damage, not the tenant's things.
Test the alarms yourself
A smoke alarm with a working light can still be silent. Press and hold the test button on every alarm, write down which one did not sound, and fix it that day if you can — a spare battery and a spare alarm in the car turn a finding into a fixed item. Where the home has gas appliances, a fireplace or an attached garage, check the carbon monoxide alarms the same way.
The form keeps one line per alarm, so next time you can see which one keeps failing.
Decide wear and tear or damage on the day
Every repair asks what caused it: ordinary wear, tenant damage, a fault in the building, or not yet known. A worn carpet track is wear; a hole in a door is damage. Deciding with a photo in front of you is fairer than arguing about it from memory when the tenant moves out.
Speak while you walk, and the document writes itself — each room fills in as you describe it, and photos land against the room you are standing in.
Common questions
How often should a landlord inspect a rental property?
Every three to six months is common for a routine visit, with some landlords moving to once a year for a long, trouble-free tenancy. Local law may cap the frequency or set the notice you must give, so check before you set a schedule.
What should a landlord inspection form include?
The outside and grounds you are responsible for, each room's walls, floors, windows, doors and electrics, the kitchen appliances and plumbing, each bathroom, a test of every smoke and carbon monoxide alarm, heating, cooling and hot water, signs of leaks, mold and pests, anything the tenant has reported, and a list of repairs with who will deal with them.
Does the tenant have to be there?
Usually not, if proper notice was given, but it helps. A tenant who walks round with you points out what is bothering them, and you can agree repairs on the spot. The form records whether they were present and asks for their signature only if they were.
Is this the same as a move-in or move-out inspection?
No. Move-in and move-out records describe the home at the start and end of a tenancy so the two can be compared for the deposit. This form is the routine visit during the tenancy and is about maintenance and care.
What if I find something unsafe?
Deal with it the same day. An alarm that will not sound, a loose stair rail, a gas smell, exposed wiring or an active leak should not wait for the written report. The form asks whether anything needed a same-day response and what you did about it.