Free for life: Get a Quote and Book Online buttons for your website. Create my widgets →Need a website? $25/mo or $500 once →
ReportWalk

Automotive

Multi-Point Vehicle Inspection

The service shop's multi-point inspection, handed to the customer: lights, wipers and glass, tread and pressure at every wheel, brake pad thickness per axle, steering and suspension, fluids and filters, belts and hoses, a battery test, exhaust and leaks seen from underneath — each graded Good, Needs attention soon or Needs attention now — then a priced list of recommended work with the customer's decision on each line, and signatures.

Free — no account, no trial, no card.

Fill this in and download the finished PDF. Your answers stay on this device as you type. We ask for an email address once, at the download.

Inspecting a fleet vehicle once a year for the operator, with a defect log and a pass or fail result rather than a customer's service sheet? That has its own form: Annual vehicle inspection

0 of 114 answered0%
1

Customer and Vehicle

Whose car, which car, and why it is in the shop today.

Tell me what you seeSign in to talk instead of typing.

0/3 · they go into your PDF and stay on this computer

2

Exterior and Lights

Walk round with the lights on, then sit in the seat with the engine running.

Tell me what you seeSign in to talk instead of typing.

Hazy lenses cut the light on the road a lot. Restoring them is usually an amber item.

Write down any that stay lit — check engine, ABS, airbag, tire pressure — in the notes.

Dents, scratches and chips the customer should know were there before the work. Not graded.

0/6 · they go into your PDF and stay on this computer

3

Wipers and Glass

What the driver looks through, and what keeps it clear.

Tell me what you seeSign in to talk instead of typing.

A chip outside the driver's line of sight is often repairable; a running crack usually means replacement.

0/3 · they go into your PDF and stay on this computer

4

Tires

Each wheel measured at its shallowest groove, pressure written down before it is corrected.

Tell me what you seeSign in to talk instead of typing.

Edge wear or feathering on one axle usually points to alignment. Amber if it should be measured.

0/6 · they go into your PDF and stay on this computer

5

Brakes

Wheels off where the job allows. The thinnest pad or shoe on each axle is the one that counts.

Tell me what you seeSign in to talk instead of typing.

Look for scoring, a lip on the rotor edge, a sticking slide, or one pad wearing much faster than the other.

Dark fluid or a high moisture reading on a test strip or pen means a flush is due.

0/4 · they go into your PDF and stay on this computer

6

Steering and Suspension

Play, leaks and torn boots — wheels in the air and then on the ground.

Tell me what you seeSign in to talk instead of typing.

0/4 · they go into your PDF and stay on this computer

7

Fluids and Filters

Under the hood: levels, color and smell, then the filters.

Tell me what you seeSign in to talk instead of typing.
8

Belts and Hoses

Engine off, a light on the belts, a squeeze on every hose.

Tell me what you seeSign in to talk instead of typing.

Many newer belts wear without cracking. A wear gauge across the ribs tells more than the eye.

Not checked on engines with a timing chain.

0/3 · they go into your PDF and stay on this computer

9

Battery and Charging

Tested with an electronic tester, compared with the battery's own rating.

Tell me what you seeSign in to talk instead of typing.

Take the verdict from the tester printout, and attach the printout as a photo.

0/2 · they go into your PDF and stay on this computer

10

Exhaust and Underbody

Only when the car went up on the lift. Leaks first, then the exhaust from front to back.

Tell me what you seeSign in to talk instead of typing.

Answer No and the underbody checks fold away and are left out of the score — the sheet will show they were not looked at.

11

Recommended Services

Every amber and red item turned into a line the customer can say yes or no to.

Tell me what you seeSign in to talk instead of typing.
Recommended services

Nothing added yet.

12

Customer Sign-Off

Shown to the customer, decisions recorded, both sides sign.

Tell me what you seeSign in to talk instead of typing.

Go through every red and amber item with the customer before they sign. Their signature confirms they were shown the findings and made the decision recorded on each recommendation — including any work they declined.

Sign above — Technician
Sign above — Service advisor
Sign above — Customer

Free, no account needed. Your answers never leave this browser.

A multi-point vehicle inspection form is the sheet a service shop fills in while a car is in the bay and then hands to the customer: every item the technician looked at, graded green, amber or red, with the tread depths, brake measurements and battery result that back the grades up. This one ends with a priced list of recommended work where the customer says yes, no or later to each line, and both sides sign. Fill it in here and download the PDF with no account — or speak while you walk round the car, and the document writes itself.

What the multi-point inspection is for

Most cars come into a shop for one thing — an oil change, a noise, a recall — and the multi-point inspection is the look round everything else while it is there. Done well, it is the most useful thing the customer takes home: a dated record of the car's condition that tells them what can wait, what to budget for, and what should not wait at all.

It is not a state safety inspection, an annual fleet inspection or a pre-purchase survey. It does not pass or fail the vehicle. It is the shop's honest opinion on the day, and it is only as good as the measurements and photos behind it.

Green, amber, red — and "not checked"

Good means nothing needs doing. Needs attention soon means it is fine today but worn or weeping enough that the customer should plan for it — a tire at 4/32 in, a belt starting to crack. Needs attention now means the technician would not leave it: pads at the backing plate, a cord showing, a battery that failed its load test.

Not checked matters as much as the colors. A quick-service visit without a lift cannot see the exhaust or the ball joints, and an honest sheet says so instead of marking them green. On this form Not checked is left out of the score, and the whole underbody section folds away when the car was not raised.

Measure, then grade

A color on its own invites the question "says who?". A number answers it, and the next visit can compare against it. The places where a measurement earns its place:

  • Tread depth on each tire, at the shallowest groove — in 32nds of an inch or in millimeters, whichever the shop uses.
  • The pressure each tire had when the car arrived, before it was corrected.
  • The thinnest brake pad or shoe on each axle, in millimeters or as a percentage left.
  • The battery tester's reading against the battery's rating, and the charging voltage.
  • Coolant freeze protection, and the oil-life figure or next-service mileage.

Recommended work, and work the customer declines

Every amber or red item should turn into a line on the recommended services list: what the work is, how urgent, and a price. The customer then approves it, declines it, or asks to leave it until next time — and that answer is recorded against the line.

Declined work is where a shop most needs a record. If a customer chooses not to replace brakes that were graded red, the signed sheet shows they were told, what they were told, and that they decided. It protects the shop and it keeps the conversation honest.

Common questions

What does a multi-point vehicle inspection include?

Typically the lights and horn, wipers and glass, each tire's tread and pressure, the brakes on both axles, steering and suspension parts, the fluids and filters, belts and hoses, a battery test, and a look underneath for exhaust damage and leaks. This form covers all of those and adds a recommended-services list with the customer's decision on each line.

What do the colors on a multi-point inspection mean?

Green is good, amber means it will need attention soon and is worth budgeting for, and red means it needs attention now. Items the technician did not look at should be marked Not checked rather than green.

How is tread depth recorded?

At the shallowest groove of each tire, in 32nds of an inch in the US or in millimeters elsewhere. Many shops treat around 4/32 in (about 3 mm) as the point to plan replacement; legal minimums are lower and vary by state and country.

Is a multi-point inspection the same as a state inspection?

No. A state safety or emissions inspection is a government test done to a set procedure at a licensed station, with a pass or fail. A multi-point inspection is the shop's own condition report for the customer and has no pass or fail.

Should the customer sign the multi-point inspection?

It is good practice, especially when they decline recommended work. Their signature shows they were shown the findings and made the choice recorded on each line.