Free Inspection Report Templates

Browse 275 free inspection report templates for home inspectors, field professionals, and property managers.

🏠 Home & Property

• Home Inspection Report: Complete property inspection covering structural integrity, safety systems, and detailed findings with recommendations.
• Rental Property Inspection: Rental unit condition checklist for landlords and property managers. Document every room and system.
• Move-In/Move-Out Inspection: Room-by-room condition documentation for tenant transitions. Protect deposits and prevent disputes.
• Property Condition Assessment: A property condition assessment for a commercial building, laid out system by system: site, structure, facade, roof, interiors, plumbing, HVAC, electrical, fire protection, lifts and accessibility. Each gets a condition rating, age, remaining useful life, the deficiencies seen and a cost horizon — with your own opinion of cost, a document review, interviews and a cost table.
• Apartment Inspection Checklist: A routine apartment inspection for property managers: unit door and hall, living areas, kitchen, every bedroom and bathroom, laundry, balcony, smoke and CO alarms, leaks and mould, and care of the unit against the lease — ending in a repair list that says whether each item is wear and tear, tenant damage or a building fault.
• Condo Inspection Checklist: Condominium inspection covering unit interior, common areas, and HOA concerns.
• New Construction Inspection: A phased inspection of a new home for the buyer or owner: pick the visit — before the foundation pour, before drywall, or the final walkthrough — and only that visit's checks appear. Builder and permit details on the first page, and a list of items for the builder to correct with location, photo and severity.
• Pre-Purchase Inspection: Buyer's inspection checklist covering all major systems before closing.
• Entry Condition Report: An entry condition report for an Australian residential tenancy: every room and item recorded as clean, undamaged and working — or not — with the agent's and the tenant's comments side by side, photos, meter readings, keys and remotes, smoke alarms, a furniture inventory where the home is let furnished, and signatures from both. Each state sets its own form, so check yours.

🔧 Trade-Specific

• Electrical Inspection Report: Comprehensive electrical system evaluation including wiring, panels, outlets, and code compliance.
• HVAC Inspection Report: Heating, ventilation, and air conditioning assessment with efficiency ratings and maintenance notes.
• Plumbing Inspection Report: Water supply, drainage, fixtures, and water heater evaluation.
• Roofing Inspection Report: Roof condition assessment covering materials, flashing, gutters, and estimated remaining life.
• Foundation Inspection Report: Structural foundation evaluation including cracks, settlement, and drainage.
• Pest Inspection Report: A pest inspection report for technicians and the sites they service: areas inspected, evidence of rodents, crawling and flying insects, stored-product pests and birds, the conditions that attract them, a numbered bait station and trap log, any treatment applied, and recommendations split by who has to act.
• Mold Inspection Report: Mold assessment covering visual inspection, moisture readings, and sampling locations.
• Radon Inspection Report: Radon testing results, measurement locations, and mitigation recommendations.
• Sewer Scope Inspection Report: A sewer scope inspection report template for a camera inspection of the lateral from the house to the city main or septic tank: where you went in, the camera used, how far it reached and why it stopped, the pipe materials seen, every camera observation with its footage, type, severity and frame grab, a link to the video, and a plain recommendation — monitor, clean, descale, repair or replace.
• Pool & Spa Inspection: A pool inspection checklist for a residential pool and spa: pool type, barriers, gates, self-closing latches and door alarms, main drains and entrapment covers, water level and condition as seen, interior finish, coping and deck, steps and ladders, skimmers, pump, filter, heater, valves and timers, bonding where visible, GFCI and lights, any diving board or slide, the spa and its own barrier, and what was not inspected.
• Chimney Inspection Report: A chimney and fireplace inspection report for home inspectors and sweeps: the appliance and fuel, the stack above the roof (crown, cap, flashing, masonry, height), the firebox and hearth, damper and smoke chamber, the flue liner as far as it can be seen, gas and stove details, clearances to anything that burns, smoke and CO alarms, what could not be inspected and why, and recommendations. It says plainly in the report when the flue was not video-scanned.
• Septic Inspection Report: A visual septic system inspection report for home inspectors: system type, age, permit and pumping records, the plumbing inside the house, how the tank was found, risers and lids, who opened the tank and whether it was pumped, liquid level, scum and sludge, baffles and effluent filter, the distribution box, pumps and alarms, drain field surface signs (wet ground, odor, lush strips, surfacing effluent), an optional hydraulic load test, setbacks from the well and water, what was not inspected, and recommendations. It is not a state or county septic certification form.
• Well Water Inspection: A private well inspection report for home inspectors: well type, age, depth and yield from records, the wellhead and casing, the sanitary cap, distances to the septic system and other contamination sources, the pressure tank, pump and pressure switch, cut-in and cut-out pressures, an optional flow or yield test, water treatment equipment, what the water looks and smells like at the tap, and a list of samples taken — lab, tests ordered and results pending until the lab reports.
• Asbestos Inspection Report: An asbestos inspection report template for a suspect-materials survey of a house: building age, every suspect material with its location, type, friability, damage and photo, a sample log with lab results, and recommendations to leave, encapsulate or have a licensed contractor remove. Not an accredited (AHERA-style) survey — the form says so.
• Stucco Inspection Report: A stucco and EIFS inspection report: identify the cladding (hard-coat or EIFS), walk every elevation for cracks, staining, bulges, sealant, bottom terminations and kick-out flashing, check window and door perimeters, record probe or scan readings with the method behind each one when testing was done, note what could not be inspected, and finish with recommendations.
• Gas Appliance Installation Check: A gas engineer's working record of installing and commissioning one appliance: appliance and flue details, meter and pipework, tightness test and purge readings, flue and spillage tests, ventilation, gas rate, pressures and combustion readings, handover, notification and unsafe situations. It does not replace a landlord gas safety record or any certificate.
• Drone Roof Inspection Checklist: Drone-based roof inspection checklist for documenting aerial assessments.
• Wood Destroying Insect Inspection (WDI): A field record for a visual wood destroying insect (WDI) inspection: structures and areas inspected, what blocked access and where, evidence found by location and insect, conducive conditions such as wood touching soil and excess moisture, signs of earlier treatment, and the recommendation. It is the inspector's notes, not the NPMA-33 or a state WDI form.
• Forensic Foundation Inspection Report: Detailed forensic foundation inspection for structural damage documentation.
• Water Heater Assessment Survey: Water heater condition assessment for plumbers and property managers.
• Electrical Safety Checklist: A workplace electrical safety checklist for a non-electrician's visual walk: boards and panels (one entry each), sockets and fittings, cords and extension leads, RCD or GFCI protection, portable appliance test tags, wet areas, overhead lines, temporary supplies and isolation points. Not an electrical installation condition report.
• Electrical Safety Test Report: Electrical safety testing results documentation for compliance.

🌴 Florida-Specific

• 4-Point Inspection Form: Florida insurance inspection covering roof, electrical, plumbing, and HVAC — the four systems underwriters care about.
• Wind Mitigation Inspection Form: Florida wind mitigation form for insurance premium discounts.
• Florida Home Inspection Report: Florida-specific home inspection covering hurricane straps, impact windows, and code compliance.

🔥 Fire & Safety

• Fire Safety Inspection Checklist: Comprehensive fire safety evaluation covering alarms, extinguishers, exits, and suppression systems.
• Fire Extinguisher Inspection: A monthly visual check of every extinguisher on site, one entry per unit: where it is, what type, access, pin and seal, gauge or weight, hose, body, label and service tag — with a photo of the tag and what was done about any that failed.
• Fire Alarm Inspection Report: Fire alarm system testing and inspection documentation.
• Fire Door Inspection: Fire-rated door inspection checklist for compliance and safety.
• Fire Sprinkler Inspection: A visual fire sprinkler inspection for facility managers and building owners, set by frequency — weekly, monthly, quarterly or annual: control valves (open, sealed or locked, supervised), gauge readings, obstructions, a list of problem heads with photos, the spare head cabinet and wrench, the fire department connection, alarm devices, signs, piping, impairments and deficiencies. It does not replace the licensed contractor's inspection report.

🚛 Vehicle & Fleet

• Vehicle Inspection Checklist: Pre-trip and general vehicle condition inspection.
• Pre-Trip Vehicle Inspection: DOT-compliant pre-trip inspection for commercial vehicles.
• Forklift Inspection Checklist: The operator's pre-use forklift check for every shift: the driver's authorisation, a walk-round with the key out, tyres, forks, chains and hydraulics, the fuel or battery checks for this truck's power type only, then operating checks with it running. A defect on a safety-critical item tells you to tag the truck out.
• Truck Inspection Checklist: Commercial truck inspection covering cab, engine, brakes, and cargo.
• Heavy Equipment Inspection: Construction and industrial heavy equipment pre-operation inspection.
• Monthly Tanker Inspection: A monthly check of a road tanker's barrel, inside and out: shell, cladding, ladder and walkway, manlids and seals, baffles, spray balls and CIP, valves, manifold, sample taps and hoses — with food-grade hygiene checks you can switch off for fuel and chemical tankers.
• Vehicle Defect Report: Report a defect on a vehicle or trailer: what is wrong and exactly where, how serious it is, whether the vehicle can still be driven, and who was told — then the workshop's repair, test and return-to-service sign-off. An optional full walk-round check rides along for a daily nil-defect record.
• Bus Inspection Form: DOT-compliant bus safety inspection for transit and school fleets.
• Golf Cart Daily Inspection: Daily inspection form for golf carts at resorts, courses, and communities.
• Boat Inspection Checklist: Marine vessel inspection for marinas, coast guard, and insurance surveys.
• Vehicle Reversing Safety Checklist: Fleet safety checklist for vehicle reversing operations and blind spots.
• Daily Vehicle Inspection Report: A daily vehicle inspection report (DVIR) for trucks, vans and pickups: the previous report checked first, a walk-round of tyres, lights, leaks, cab, brakes and emergency equipment, an optional trailer check, then each defect logged with whether it affects safe driving — with the repair certification and the next driver's review signed on the same report.
• Vessel Operator Orientation Registration: Marina and port vessel operator orientation sign-up and safety checklist.
• New Car Purchase Checklist: Vehicle handover and delivery inspection checklist for dealerships and buyers.
• Vessel Weather Capability Assessment: Vessel and crew readiness evaluation for challenging weather conditions.
• Multi-Point Vehicle Inspection: Comprehensive multi-point vehicle condition check for purchase or rental.
• Pre-Delivery Inspection Form: A vehicle pre-delivery inspection (PDI) for dealers and fleet buyers: arrival and transit damage, recalls and software, body and paint, tyres set to placard pressure, fluids, lights, electrics and driver aids, a road test and the handover pack — with an underbody and wear section that switches on for used vehicles.
• Monthly Vehicle Inspection Form: A monthly check for fleet cars, vans and utes: the outside, tyres with the shallowest tread measured, under the bonnet, the driver's seat and controls, and the emergency kit — with EV checks for electric and plug-in vehicles, what changed since last month, and a status for the vehicle.
• Annual Vehicle Inspection Form: A yearly inspection report for one fleet vehicle: body and glass, lights, a tyre-by-tyre log with tread and date codes, under the bonnet, brakes, steering and suspension, cab equipment, paperwork and a road test, a defect log and a signed result. A switchable section adds what a US commercial motor vehicle's periodic inspection covers.
• Box Truck Inspection Form: Box truck pre-rental and condition inspection for moving companies.
• Straight Truck Pre-Trip Inspection: Pre-trip safety inspection for straight trucks and delivery vehicles.
• Pickup Truck Inspection Form: Pickup truck condition and safety inspection documentation.
• DOT Inspection Form: Get a commercial motor vehicle and its driver ready for a DOT roadside inspection: licence, endorsements, medical certificate and hours-of-service records; registration, the annual inspection and DVIRs; lights, air brakes, tyres, steering and frame; one entry per trailer; cargo securement, hazmat papers and placards, and emergency equipment.
• 150-Point Vehicle Inspection: Comprehensive 150-point inspection covering all vehicle systems and components.
• 90-Day Equipment Inspection: Quarterly equipment inspection for preventive maintenance compliance.
• Rental Vehicle Inspection Checklist: Vehicle condition documentation at pickup and return for rental agencies.
• Tow Truck Inspection Checklist: Tow truck safety and equipment inspection for towing companies.
• Rental Car Damage Inspection: Vehicle damage documentation at pickup or return for rental agencies.
• Trailer Towing Safety Checklist: Pre-trip towing safety checklist for trailers and hitched loads.
• Vehicle Safety Standards Audit: Automotive safety standards audit for compliance and certification.
• Trailer Safety Inspection Survey: Routine trailer safety inspection for fleet maintenance tracking.
• Hybrid Vehicle Inspection Checklist: Hybrid vehicle-specific inspection covering battery, regen, and dual systems.
• E-Bike Safety Certification Checklist: E-bike safety inspection and certification documentation.
• Delivery Scooter Inspection Checklist: Daily scooter fleet inspection for delivery businesses.
• Boom Truck Inspection Checklist: Boom truck safety inspection for construction and utility fleets.
• Vehicle Emissions Inspection Log: Emissions test result tracking for inspection stations and fleets.
• Vehicle Load Safety Checklist: Pre-trip cargo load safety inspection for transport and logistics.
• Restaurant Delivery Vehicle Inspection: Daily delivery vehicle inspection for restaurant fleet managers.
• Logistics Vehicle Roadworthiness Inspection: Fleet roadworthiness check for logistics and transport companies.

🏢 Commercial & Workplace

• Incident Report: Record a workplace incident while it is still fresh — people, damage, actions. Conditional questions, severity index, photos from your phone.
• Commercial Property Inspection: Commercial building inspection for investors, tenants, and property managers.
• OSHA Self-Inspection Checklist: All 41 subjects of OSHAu2019s self-inspection checklist, gated so you answer only what you have. A print shop skips confined spaces and spray finishing in two taps. Most single-site employers answer about 120 of the 260 checks.
• Warehouse Inspection Checklist: A warehouse safety checklist for the storage floor, racking, block stacks, loading docks, yard, forklifts, battery charging, chemicals, fire, cold stores and food storage — with a racking damage log by bay. Switch off the areas you do not have; they will not count against your score.
• Workplace Safety Inspection: A workplace safety inspection checklist for the manufacturing floor: machine guarding with a defect log, lockout as it is really done, forklifts among people, chemicals at the line, noise, dust and fume extraction, compressed air, hot work, line ergonomics, housekeeping and emergency arrangements. Switch off what your plant does not have.
• ADA Compliance Checklist: Americans with Disabilities Act accessibility compliance inspection.
• Elevator Inspection Checklist: A building owner's or manager's routine check of one elevator car: certificate and maintenance records, a ride inside the car, doors and landings, the emergency phone and alarm, and the machine room and pit only where you are authorised. Not the statutory inspection by a licensed inspector — the record you keep between those.
• Equipment Inspection Form: General equipment inspection for preventive maintenance and safety compliance.
• Ladder Inspection Form: A ladder inspection for every ladder on site, one entry each: stiles, rungs, feet, fixings and labels for all of them, then the checks for that type only — spreaders and top caps on stepladders, rung locks and ropes on extension ladders, section locks on telescopic ones, fixings and cages on fixed ladders. Every failed ladder records whether it was tagged and taken away.
• Safety Harness Inspection: A detailed inspection of one full body harness: its label, service life and history first, then every strap, every stitch pattern, the fall indicator, the rings, buckles and adjusters, and an optional check of the fit on the wearer. Ends in a clear decision — use it, recheck it, or withdraw it.
• Job Safety Analysis (JSA): Hazard identification and risk assessment for specific job tasks.
• Safety Walk Checklist: Nine topics, each one skippable: work areas, PPE, height, ladders, tools, excavations, electrical, fire and the people doing the job. Skip what is not on your site and it will not count against your score.
• Daily Pre-Start Safety Inspection: The tailgate meeting as a document: todayu2019s tasks, the hazards in each, the controls going on them, and every name that was in the huddle.
• Take 5 Safety Checklist: One person, one task, sixty seconds. Stop, Look, Assess, Control, Monitor u2014 the point-of-work check used across Australian and New Zealand sites.
• Incident Investigation Report: The full investigation: timeline, evidence log with chain of custody, everyone involved and their injuries, root cause, and corrective actions with owners and dates.
• General Workplace Inspection: The periodic sweep of any workplace that is not a building site u2014 fire, floors, storage, machinery, electrical, chemicals, ladders, first aid, office and vehicles. Fourteen topics, each one skippable.
• Behaviour Based Safety Observation: A short, anonymous observation of one task as it is actually being done, followed by a conversation. No names recorded, and it asks what made the unsafe way the easy way.
• 5S Audit Checklist: Sort, Set in Order, Shine, Standardise, Sustain u2014 each scored separately, so you can see which of the five is actually failing. Shop floor, dispatch bay or back-of-house.
• GMP Audit Checklist: Good Manufacturing Practice across hygiene, cleaning, facility, equipment, materials, production, quality, packaging, traceability and training. Batch-stopping items are weighted.
• Gemba Walk Checklist: Go to where the work is done with one question in mind, look at safety, organisation, flow, quality, equipment and visual management, and record the conversations — what you saw, what you asked, what you heard, and who follows up. Scores the process, never the people.
• Workshop Inspection Checklist: A workshop inspection checklist for school, college, maintenance and vehicle workshops: layout and access, one entry per machine (guard, stop, isolation, signage, condition), hand and power tools, dust extraction, the welding bay, chemical storage, PPE, first aid and eyewash, fire, and supervision. Teaching and vehicle checks only appear when they apply.
• AED Monthly Check: The sixty-second monthly round on a defibrillator: status indicator, pads, battery, expiry dates and rescue kit. Unit details carry from last month, so you record only what changed.
• EV Charger Inspection Checklist: A Level 2 EV charger inspection for homes and small commercial sites, one entry per charger: make, model and rated output, the breaker against the label, a circuit of its own, ground-fault protection, mounting, cable, connector and strain relief, labeling, then panel capacity, location, clearances, impact protection and a charging test where one was possible.
• Building Inspection Checklist: A periodic inspection of a commercial or multi-occupancy building by the person who manages it: exterior and grounds, the roof from safe access, common areas, fire and life safety, building services, plant rooms, lifts, car park, accessibility and security. Switch off what the building does not have; it will not count against the score.
• Cleaning Inspection Form: Standardized cleaning inspection for rooms, facilities, and commercial spaces.
• Common Area Inspection Form: Facility cleanliness and condition inspection for shared building spaces.
• Hazardous Material Handling Checklist: Safety and compliance checklist for handling hazardous materials.
• Chemical Exposure Assessment: Incident documentation and safety follow-up for chemical exposure events.
• Chemical Safety Information Sheet: Chemical handling safety documentation for labs, schools, and worksites.
• Dangerous Goods Shipping Checklist: Hazardous shipment packaging and documentation compliance checklist.
• Lead Acid Battery Safety Assessment: Battery storage and handling inspection for safety compliance.
• Safety Data Sheet (SDS) Communication: SDS request tracking and communication for EHS and operations teams.
• Material Storage Condition Review: Storage condition inspection and review for labs, warehouses, and manufacturing.
• Athletic Field Inspection Form: Sports field condition assessment and safety hazard documentation.
• Railway Track Safety Inspection: Rail track inspection for maintenance and operations teams.
• IT Room Weekly Inspection Checklist: Server room and IT infrastructure weekly condition inspection.
• Sensor Inspection & Maintenance Checklist: Sensor condition tracking and maintenance documentation for facility teams.
• Valve Inspection Checklist: Industrial valve condition inspection and documentation.
• Cargo Security Inspection Form: Cargo security and integrity inspection for logistics and warehouses.
• Recycling Plant Safety Inspection: Safety inspection for recycling and waste processing facilities.
• Chilled Water System Inspection: HVAC chilled water system inspection for facility maintenance teams.
• Mining Operation Safety Inspection: Mining site safety inspection and compliance checklist.
• Ski Lift Safety Inspection: Ski lift mechanical and safety inspection for resort operations.
• Telecom Field Inspection Checklist: Telecom infrastructure on-site inspection and documentation.
• Power Grid Inspection Form: Electrical grid asset inspection and condition documentation.
• Fall Protection Equipment Inspection: A register-style inspection of fall protection kit: one entry per harness, lanyard, self-retracting lifeline, rope grab, anchor, connector or rescue kit, with the checks for that type only and a decision on each — keep, quarantine or destroy. Plus the checks that sit between items: storage, quarantine, compatibility and rescue.
• Outdoor Safety Assessment: Outdoor area safety inspection for parks, playgrounds, and facilities.
• Runway & Taxiway Inspection: Airport runway and taxiway condition inspection survey.
• Artificial Turf Inspection Checklist: Synthetic turf field condition inspection for facilities teams.
• ATM Inspection Form: Routine ATM condition and security inspection for banking teams.
• PPE Checklist: A personal protective equipment (PPE) checklist for one work area or task: what could harm the eyes, face, head, feet, hands, body, hearing and breathing, whether the right PPE is specified, provided, worn and in good condition, and a spot check of the people doing the work. Doubles as a written PPE hazard assessment.
• Confined Space Entry Checklist: A pre-entry checklist for permit confined spaces: the hazards, the permit, isolation, gas readings logged one by one (O2, LEL, H2S, CO, with time and depth), ventilation, the attendant, the rescue plan, an entrant in-and-out log, and closing the permit. Any reading outside limits stops the entry on the form.
• Lockout Tagout Safety Checklist: A lockout tagout safety checklist for one piece of equipment: preparation, then a list of every isolation point — energy type, device, lock, tag, stored energy released, zero energy proven, start tried — then group lockout and shift handover, returning to service, and the periodic audit of the written procedure.
• Laboratory Inspection Form: Lab safety standards inspection for government and facility compliance.
• Factory Safety Inspection Form: Manufacturing floor safety inspection and compliance documentation.
• Shop Safety Inspection Form: Workshop and shop floor safety inspection checklist.
• Lifting Equipment Safety Inspection: Lifting gear inspection for cranes, hoists, and slings.
• Hospital Safety Inspection Form: Healthcare facility safety compliance inspection checklist.
• Generator Inspection Form: Standby and portable generator condition and safety inspection.
• Security Inspection Checklist: Site security inspection and access control documentation.
• Building Safety Audit Checklist: Building-wide safety audit for property managers and facility teams.
• Industrial Inspection Checklist: Routine industrial equipment and safety inspection documentation.
• Playground Equipment Inspection: Playground equipment safety inspection and condition documentation.
• Oil Rig Safety Inspection Form: Offshore oil rig safety inspection and compliance documentation.
• Hospital Safety Checklist: Department-level hospital safety inspection documentation.
• Cruise Ship Sanitation Inspection: Vessel hygiene and sanitation inspection for cruise operators.
• Ride Safety Inspection Form: Amusement park ride safety inspection and documentation.
• Conveyor System Safety Inspection: Conveyor belt and system safety inspection for warehouses and factories.
• Fuel Storage Tank Inspection: Fuel tank condition inspection and maintenance documentation.
• Steam Boiler Safety Checklist: Boiler room safety inspection for facilities and maintenance teams.
• Floor Safety Inspection Checklist: Floor hazard documentation for facility safety walkthrough.
• Aquatic Center Safety Inspection: Pool and aquatic facility safety inspection checklist.
• University Dormitory Health Inspection: Campus housing health and safety inspection for residence halls.
• Hose Inspection Checklist: Industrial hose condition inspection and maintenance documentation.
• Community Center Safety Inspection: Community facility safety compliance inspection.

🏗️ Construction

• Construction Site Inspection: The project site audit: safety plan, inductions, briefings, traffic plan and open actions; method statements checked against the work; permits and controls for high-risk tasks; then plant, electrics, welfare, emergency cover and the environment on the ground.
• Construction Punch List: A construction punch list for the closeout walk and every back-check after it: one entry per item with a number that never changes, its level and room, the trade, a photo, who fixes it and by when — and a status that only reaches Verified closed when somebody has gone back and looked. Closeout documents switch on for the final walk.
• Scaffolding Inspection: A scaffolding inspection for an erected scaffold: why it is being inspected and the tag as you found it, then foundations, structure and ties, platforms, edge protection, access, people working on it, and the surroundings — ending by setting the tag to safe, restricted or do not use.
• Crane Inspection Checklist: A job-site inspection of a mobile crane and the lift around it: certificates and people, ground and outrigger set-up, rigging up or down, the exclusion zone, overhead power lines, a walk-round of the machine, rigging and the load, and lifting people — ending in a go, go with conditions, or stop.
• Daily Job Site Safety Briefing: Daily safety briefing form for construction and industrial sites.
• Excavation Safety Checklist: A daily excavation and trench inspection for the competent person: services located, depth and ground, the protective system actually in use (sloping, benching, shoring or a trench box), water, spoil and plant set-back, ladders, atmosphere, public protection and rescue — ending in a clear decision on whether anyone can go in today.
• Weekly Site Safety Inspection: The weekly record of a construction site: the week's weather, trades and events, last week's open actions, then first aid and welfare, fire, security, PPE, housekeeping, falls, scaffolds, manual handling, tools, plant, ladders, electrical, hazardous substances, confined spaces and incident reporting. Skip what your site does not have — it will not count against your score.
• Construction Site Cleaning Checklist: Housekeeping on a live site — ground, access routes, work areas, storage, skips and welfare — or a builders' clean signed off room by room with before and after photos. Pick one or both at the top; skipped topics never count against the score.
• Working at Heights Inspection: An inspection of work above ground or beside an edge: what is being done and by whom, which hazards are present, and whether the controls follow the right order — avoid, prevent, then arrest. One entry per ladder, tower, scaffold or MEWP, one per harness and anchor, plus fall clearance and a rescue plan.
• Traffic Control Audit: A worksite traffic control audit that checks what is set out on the road against the approved traffic plan: advance signs, speed zones, tapers and delineation, traffic controllers or flaggers, portable signals and message boards, barriers, the end of the queue, pedestrians and cyclists, works vehicles and night work. Switch off what the site does not use.
• Pre-Pour Inspection Checklist: Required inspection before every concrete pour on construction sites.
• Daily Concrete Pour Log: Construction documentation log for concrete placement operations.
• Framing Inspection Checklist: Pre-drywall framing inspection for structural compliance and code verification.
• Asbestos Removal Safety Plan: Safety plan documentation for asbestos removal projects.
• Equipment Load Testing Report: Load testing documentation for cranes, hoists, and lifting equipment.
• Construction Quality Control Survey: Quality control inspection for construction workmanship and materials.
• Pre-Project Site Assessment: Site assessment before construction including access, safety, and conditions.
• Wall Surface Inspection Checklist: Wall surface condition inspection for contractors and facility teams.
• Parapet Inspection Checklist: Building parapet condition and safety inspection documentation.
• Bridge Inspection Drone Checklist: Drone-based bridge inspection data collection for engineers and crews.
• Glass Systems Evaluation Checklist: Window and glass system condition inspection for buildings.
• Demolition Safety Checklist: Pre-demolition safety assessment and compliance checklist.
• Elevated Work Platform Safety Checklist: EWP/scissor lift daily pre-operation inspection checklist.
• Scaffold Handover Certificate: Scaffold inspection handover documentation for construction sites.

🍽️ Food & Restaurant

• Restaurant Inspection Checklist: What a health inspector checks in a restaurant, critical versus non-critical violations, and how to be ready before they arrive. Free fillable checklist and PDF.
• Food Premises Self-Inspection: The weekly walk-thru a kitchen does on itself: hygiene, facilities, equipment, ware washing, pests and the temperature-critical controls. 147 checks, the critical ones weighted.
• Kitchen Inspection Checklist: Commercial kitchen equipment, cleanliness, and safety inspection.

🏨 Hotel & Hospitality

• Hotel Room Inspection: Check a guest room the way the guest will meet it — entry, bed, room, bathroom, supplies, safety and final set-up — with pass or fail on every item, photos of faults, and one decision at the end: ready to sell, or held. Kitchenette, balcony, minibar, connecting door and accessible-room checks appear only when the room has them.
• Hotel Housekeeping Checklist: The room attendant's checklist for servicing a hotel room in order — knock and enter, strip and clear, bathroom, bed, dusting, restock, vacuum and final set-up — with stayover courtesies, a turndown service, the stop-and-call rule for hazards, and a hand-over of faults and lost property.
• Brand Standard Room Inspection: Hotel brand standard room inspection for quality assurance and compliance.
• Room Evaluation Checklist: Hotel and property room condition evaluation for housekeeping teams.

🌿 Environmental

• Phase 1 Environmental Site Assessment: Environmental due diligence checklist for property transactions.
• Stormwater Inspection: A construction site stormwater inspection for the routine visit and the one after a storm: rainfall and discharges, the SWPPP and records, every control measure as its own entry with condition and repair needed, discharge points, entrances, slopes, inlets, stockpiles, washouts, dewatering and nearby waters — with corrective actions and the inspector's signature.
• Well Inspection Report: Water well condition inspection and recommendations documentation.
• Water Treatment Operational Inspection: Water treatment plant operational efficiency inspection.
• Tree Audit Form: Property tree inventory and condition audit for arborists and managers.
• SWPPP Inspection Form: Stormwater pollution prevention plan inspection for construction sites.